 |
The Reassurance | Silent Sentry Stand Alone | Silent Sentry Hard Wired
Emergency Power Systems:
The Reassurance
The first Reassurance models were introduced in 1990 in response to
the need for a simple, cost-effective, emergency power system for the
emerging ASC market and it became possible following the development
of high-power semiconductors.
The design objectives were to provide high-surge-starting capability for surgical suction pumps and high-inductive loads, like electrocautery units, sealed batteries (so that there were no fumes) with portable and aseptic casework. A compact, stainless steel, castor-based cabinet with a flat top was seen as the logical choice.
A family of products developed as varying needs were addressed. The REASSURANCE emergency power system is now available in capacities of 2000, 2800, 3100 and 4000 watts with either modified sinewave or pure sinewave electronics. Integral battery banks from 140 to 838 amp-hours are available in a single unit. The systems are available as "plug and play" for both point-of-use and "semi-remote" serving two rooms, or fully integrated into building wiring.
Further, they have been designed for easy serviceability - well within the technical expertise of local technicians and electricians. Fully automatic operation is within everyone's ability.
The REASSURANCE is a line of cost-effective special-purpose UPS systems. They are specially designed for small- to medium-sized ambulatory surgery centers and laboratories. Features, such as its stainless steel case, castor wheels and accessory shelf system, make it especially easy to add to an existing suite without installation costs. Its robust, industrial-strength electronics and heavy-duty telecom-type batteries make it strong and reliable.
Mobile Systems
 Mobile M2014T Cart Size A |
 Mobile M2020 thru M3142 Cart Size B |
 Mobile M2060 thru M4080 Cart Size C |
| WATTS | |||||
| MODEL NUMBER |
ELECTRONIC FAMILY |
RATED | SURGE | BATTERY AMP. HRS. |
CABINET |
| M2014T | T | 2000 | 4000 | 200 | A |
| M2020T | T | 2000 | 4000 | 200 | B |
| M2030T | T | 2000 | 4000 | 300 | B |
| M2042T | T | 2000 | 4000 | 420 | B |
| M2820MS | MS | 2800 | 5700 | 200 | B |
| M2830MS | MS | 2800 | 5700 | 300 | B |
| M2842MS | MS | 2800 | 5700 | 420 | B |
| M2860MS | MS | 2800 | 5700 | 600 | C |
| M2883MS | MS | 2800 | 5700 | 838 | C |
| M3020T | T | 3000 | 4000 | 200 | B |
| M3030T | T | 3000 | 4000 | 300 | B |
| M3041T | T | 3000 | 4000 | 414 | B |
| M3130T | M | 3100 | 6000 | 300 | B |
| M3141T | M | 3100 | 6000 | 414 | B |
| M3160T | M | 3100 | 6000 | 600 | C |
| M3183T | M | 3100 | 6000 | 838 | C |
| M4060T | M | 4000 | 7500 | 600 | C |
| M4083T | M | 4000 | 7500 | 838 | C |
NOTES ON MODEL DESIGNATIONS
| M | Mobile style cabinet, outlets on front panel. |
| T | Modified-sine, modest price, battery temp charge rate modulation, load sensing invert. |
| S | Pure sine, battery temp charge rate modulation, load-sensing inversion. |
| A | Cabinet size: 19¼" H x 21" W x 16¼" D |
| B | Cabinet size: 30½" H x 24½" W x 17" D |
| C | Cabinet size: 44" H x 24½" W x 17" D |
Note: Control panels will vary according to electronic family. |
|
RUN-TIME ESTIMATION FORMULA
(Assumes 90 minute discharge rate)
[BATTERY AMP-HRS. x 2.74]/[LOAD AMPS (@ 125 VOLTS)] = MINUTES
WATTS/125 VOLTS = AMPS
Hardwired Systems
 Hardwire Configuration HW 2060 thru 4083 Cart size C |
 Hardwire Configuration HW 2020, thru 3142 Cart size B |
| WATTS | |||||
| MODEL NUMBER |
ELECTRONIC FAMILY |
RATED | SURGE | BATTERY AMP. HRS. |
CABINET |
| HW2020T | T | 2000 | 4000 | 200 | B |
| HW2030T | T | 2000 | 4000 | 300 | B |
| HW2042T | T | 2000 | 4000 | 420 | B |
| HW2820MS | MS | 2800 | 4000 | 200 | B |
| HW2830MS | MS | 2800 | 5700 | 300 | B |
| HW2842MS | MS | 2800 | 5700 | 420 | B |
| HW2860MS | MS | 2800 | 5700 | 600 | C |
| HW2883MS | MS | 2800 | 5700 | 830 | C |
| HW3020T | T | 3000 | 5700 | 200 | B |
| HW3030T | T | 3000 | 4000 | 300 | B |
| HW3041T | T | 3000 | 4000 | 414 | B |
| HW3060T | T | 3000 | 4000 | 600 | C |
| HW3083T | T | 3000 | 4000 | 838 | C |
| HW3130M | M | 3100 | 6000 | 300 | B |
| HW3142M | M | 3100 | 6000 | 420 | B |
| HW3160M | M | 3100 | 6000 | 600 | C |
| HW3183M | M | 3100 | 6000 | 830 | C |
| HW4060M | M | 4000 | 6000 | 600 | C |
| HW4083M | M | 4000 | 6000 | 830 | C |
NOTES ON MODEL DESIGNATIONS
| HW | Hardwire style cabinet, NEMA L5-30 inlet & outlet on front panel or as specified. |
| T | Modified-sine, modest price, battery temp charge rate modulation, load sensing invert. |
| M | Modified sine, battery temp charge rate modulation, load-sensing inversion. |
| MS | Pure sine, battery temp charge rate modulation, load-sensing inversion. |
| B | Cabinet size: 30½" H x 24½" W x 17" D |
| C | Cabinet size: 44" H x 24½" W x 17" D |
Note: Control panels will vary according to electronic family. |
|
RUN-TIME ESTIMATION FORMULA
(Assumes 90 minute discharge rate)
[BATTERY AMP-HRS. x 2.74]/[LOAD AMPS (@ 125 VOLTS)] = MINUTES
WATTS/125 VOLTS = AMPS
Featured on all models:
- Stainless steel cabinet
- 10' SJ 12/3 power cord with hospital-grade plug
- Hospital-grade outlets
- Audible battery voltage alarm
- Choice of pure-sinewave or modified-sinewave power generation
30 Nurney Street Stamford, CT 06902 Toll Free: 1 800-765-3237 Fax: 1 203-487-7423 Email: mail@mediproducts.net
Company Profile | Generators for Surgeons | Generators for Gastroenterologists | Generators for Endoscopic Surgeons | Generators for Dental Office
Generators for Architects | The Reassurance Emergency Power System | Silent Sentry Stand Alone Emergency Power System
Silent Sentry Hardwired Emergency Power System | News Section | Contact MediProducts | MediProducts Brochure | Power Evaluation
Power Evaluation Instructions | Silent Sentry Spec Sheet | Sitemap