Assembly and Install of a Hardwired Battery Backup System

Who Can Install a Hardwired Backup Power System?

Medi-Products' hardwired systems offer unparalleled flexibility by providing backup power directly to appliances through the outlets they are already using, regardless of their location within a facility. Direct power delivery, assembly, and installation are required upon arrival to enable this.

Assembly and Mounting:

Assembly: The assembly of our hardwired systems is straightforward and mirrors the process used for standalone systems. It does not require specialized tools or expertise.
Mounting: While the assembly and mounting of the system can be performed by an experienced individual—such as a handyman, facilities manager, or maintenance staff—having someone with relevant experience is beneficial.

Professional Installation:

Electrical Integration: A licensed contractor or electrician is essential to complete the installation. Although they do not need to handle the assembly and mounting, their expertise is crucial for integrating the system into the facility’s electrical circuit.

How Long Does Installing a Hardwired Battery Backup Generator Take?

Assembling and mounting a hardwired system typically takes just one to two hours.

For facilities with on-site staff, the only cost to install the system is your staff's time. You can set up the project when it works best for you and save money. Doing any prep work beforehand can also reduce the time the electrician will charge you.

Wiring the battery-powered generator to the circuit panel should only take a few minutes for the electrician. However, the time needed can vary depending on how far the backup system is from the circuit panel. Usually, the closer the generator is to the panel, the quicker and cheaper the installation will be.

The electrician's job is to run and connect the wires to the generator. If your electrician or contractor has any questions or isn't sure how to install the battery backup generator, they can call Medi-Products. Our team of experts will help guide them through the simple process.

For more details, it’s a good idea to reach out to your facility’s preferred contractor or electrician about:

Pricing
Permitting requirements
The best spot for the generator

If any staff or vendors have questions about assembly, mounting, or installation, contact the Medi-Products Tech Support line at:

1.800.765.3237
Monday-Friday
8:30 am to 5:00 pm (EST)

What Tools Are Needed to Assemble and Install a Hardwired System?

Every Medi-Products backup generator comes with everything you need for assembly and mounting, including:

Self-Drilling Screws
Battery Cables
Drywall Anchors
Other Necessary Hardware

This hardware allows you to mount the system either to wall studs or directly into the drywall.

You will need to provide your own tools for the full assembly and mounting process. The tools required are:

A Phillips Head Screwdriver (for assembling the cabinet)
A Stud Finder (if mounting to wall studs)
A Drill and Bits

Installing a hardwired system involves nine steps, with seven of them being doable by you:

Unpack the Shipment
Remove the Battery Covers
Attach the Feet/Extra Battery Cabinet(s)
Mount the System
Run Line/Load Circuits
Wire Line/Load Circuits
Install the Batteries/Cables
Re-attach the Battery Covers

Steps 6 and 7, which involve running and wiring the line/load circuits, should be handled by an electrician. After a quick test to confirm everything is set up correctly, your system will be ready to provide the essential backup power your facility needs during an outage.

Note:
Once mounted to the wall, the full weight of a battery backup system is supported by the floor and feet. The wall it is mounted to only stabilizes the generator, bearing little of its weight.

Hardwired Generator Installation and Assembly Resources

For further detail and assistance, you can download and print the in-depth and quick-start installation guides below:

Additionally, every system comes with a copy of the full installation guide at delivery, which we recommend you keep for potential future use.

For any questions about the Assembly, Mounting or Installation of a Hardwired Battery Backup System, Medi Products' Technical Support Line is available at:

1.800.765.3237
Monday-Friday
8:30a-5:00p (EST)
or
Support@MediProducts.net

Find Out What You'll Pay for Backup Power

Every system-built meets every customer's needs regarding power and form factor. The quickest way to find the perfect system is to contact Medi Products directly.

To speak to our product experts, engineers, and sales teams about quoting a system and adding an alarm system contact us via: