Assembly and Install of a Hardwired Battery Backup System

Who Can Install a Hardwired Backup Power System?

Medi-Product's hardwired system provide the ultimate flexibility—providing backup power directly to appliances via the outlets they're already plugged into while being located anywhere inside a facility. In order to achieve this direct power delivery, Hardwired systems will need assembly and installation upon arrival.

Assembling and mounting a hardwired system is identical to a standalone system and does not need special tools or skills. Though someone with experience— like a handyman, facilities manager, or maintenance staff— is best suited handle this task if possible.

But, to complete the installation process a licensed contractor or electrician will be needed. While they do not need to be the one to assemble and mount the system, they are necessary to integrate the system into the electrical circuit.

How Long Does Installing a Hardwired Battery Backup Generator Take?

Assembly and mounting of a hardwired system should only take one to two hours—at most.

For facilities with on-site or in-network staff, the only cost to install a system is would be the cost of their staff's time. This allows you the flexibility to complete the project on your own schedule while saving money. In most cases, any pre-requisite work saves time the electrician would normally charge for.

Wiring the battery powered generator into the circuit panel should take only a few minutes for the electrician. However, depending on where your backup system is found relative to the circuit panel, this may vary. Generally, of thumb, the closer a battery powered generator is to the circuit panel the faster the install. This also means, the closer to the panel the less expensive the installation.

The electrician only needs to run and wire line and load circuits into the generator. If your electrician or contractor of choice has any questions, concerns or is unfamiliar with installing a battery backup generator have them contact Medi-Products directly. Our team of engineers and electricians will be able to explain and walk them through the simple process.

We recommend directly contacting your facility's preferred contractor/electrician for more information about:

Pricing
Permitting Requirements
Ideal Generator Location

If any staff or vendors have questions about assembly, mounting or installation contact the Medi-Products Tech Support line at:

1.800.765.3237
Monday-Friday
8:30a to 5:00p (EST)

What Tools Are Needed to Assemble and Install a Hardwired System?

Every Medi-Product's backup generator contains the necessary hardware to assemble and mount it including:

Self-Drilling Screws
Battery Cables
Drywall Anchors
and Other Necessary Hardware

This is all that is needed to mount a system to either the studs of your wall or directly into the drywall.

However, you will need to supply your own tools to fully assemble and mount a standalone system. Though, the only tools needed to complete the installation process are:

A Phillips Head Screwdriver (To assemble the cabinet)
a Stud Finder (If it is being mounted to the studs)
and A Drill and Bits

Installation of a hardwired system requires only nine steps. Seven of these steps can be completed by the end user.

The steps to install the hardwired generator are:

Unpacking the Shipment
Removing the Battery Covers
Attaching the Feet/Extra Battery Cabinet(s)
Mounting the System
Running Line/Load Circuits
Wire Line/Load Circuits
Installing the Batteries/Cables
Re-attaching the Battery Covers

Only steps 6 and 7 (running and wiring line/load circuits) needs to be completed by an electrician. Following a brief test to ensure proper installation, your system will be fully installed and ready to be deployed. It will then begin providing the critical backup power your facility needs to function during an outage.

Note:
Once mounted to the wall, the full weight of a battery backup system is supported by the floor and feet. The wall it is mounted to only stabilizes the generator, bearing little of its weight.

Hardwired Generator Installation and Assembly Resources

For further detail and assistance, you can download and print the in-depth and quick start installation guides below:

Additionally, every system come with a copy of the full installation guide at delivery, which we recommend you hold onto for potential future use.

For any questions about the Assembly, Mounting or Installation of a Hardwired Battery Backup System, Medi Products' Technical Support Line is available at:

1.800.765.3237
Monday-Friday
8:30a-5:00p (EST)
or
Support@MediProducts.net

Find Out What You'll Pay for Backup Power

Every system built fits directly with the need of every customer both in power and form factor. The quickest way to find a perfect system for you is to contact MediProducts directly.

To speak to our product experts, engineers, and sales teams about quoting a system, and adding an alarm system contact us via: